fatal error drawing on profile views civil 3d
Autodesk has released Civil 3D 2022 Service Pack 2. Still, it is non yet on their website. Yous will need to cheque your Autodesk Application Manager in your organisation tray.
The following issues take been resolved in Autodesk AutoCAD Civil 3D 2022 Service Pack 2:
Alignments and Profiles
- An issue has been resolved where opening an AutoCAD Ceremonious 3D 2012 cartoon in AutoCAD Civil 3D 2022 or AutoCAD Ceremonious 3D 2022 caused profiles to shift unexpectedly.
- An issue has been resolved where opening a drawing that contains corrupted profile views caused the application to close unexpectedly.
- An consequence has been resolved where horizontal grid lines in profile views were extended into the axis offset.
- An issue has been resolved where a fixed parabolic vertical bend was lost when exported to LandXML and and then imported back into AutoCAD Civil 3D.
- An issue has been resolved where station/elevation values in an Autodesk® InfraWorks™ profile were not converted from feet to meters when importing an majestic IMX file into a metric AutoCAD Civil 3D drawing.
- An issue has been resolved where the Autodesk® Civil Engineering science Data Translator did not include certain profile layout configurations when exporting drawings to files that can exist used in Bentley® GEOPAK® or Bentley® InRoads®.
- An issue has been resolved where the Export Civil 3D Drawing command would export alignments as lines and arcs instead of polylines when exporting to a DGN file.
- An upshot has been resolved where unexpected solid objects were projected to a department view.
- An upshot has been resolved where a projected solid extended above or beneath section views and profile views.
- An issue has been resolved where full superelevation critical signal labels were not drawn in certain situations.
- An issue has been resolved where the Export LandXML command output incorrect station equations for alignments that included more than than three station equations.
- An issue has been resolved where the Alignment.EndingStation API property returned raw stations when at that place were station equations in the alignment.
- An issue has been resolved where station equations could not be added to end of an alignment.
- An consequence has been resolved where a profile may exist missing when a cartoon is exported to GEOPAK using the Autodesk Ceremonious Applied science Data Translator.
- The AutoCAD Civil 3D API has been extended to enable superelevation data to be imported from an external file.
Corridor Modeling
- An issue has been resolved where the Swept Solids option in the Extract Corridor Solids command only included links and did not include shapes.
- An issue has been resolved with the search path of the subassembly codes file.
- An result has been resolved where the Extract Corridor Solids control did not include the correct corridor shape code names as part of the layer names for the solids.
- An issue has been resolved where corridor feature lines were not using the code set styles assigned to the corridor.
- An result has been resolved where the material refill factor value in the Edit Material List dialog box was blank and would not preserve an assigned value.
Feature Lines, Parcels, and Sites
- An issue has been resolved where feature lines and their site would disappear when moved to a dissimilar site in drawings created from acad.dwt.
- An issue has been resolved where using the Insert Intermediate Grade Break Points option in the Elevations From Surface control would result in errors in the drawing.
- An consequence has been resolved where invalid characters were added to feature line and alignment names in certain cases.
- An issue has been resolved where the Export Civil 3D Drawing control would export corridor characteristic lines as lines instead of polylines when exporting to a DGN file.
- An issue has been resolved where copying a parcel to another site would delete the source site in drawings created from acad.dwt.
- An effect has been resolved with crow's feet in parcel labels when a parcel intersects itself.
Miscellaneous
- An issue has been resolved where north arrows were not adjusting to north if sheets were created in the current drawing with the Create Sheets command.
- An issue has been resolved where layers created from styles did not include the definitions for transparency and plot style.
- An outcome has been resolved where labels for information-referenced surfaces were non appearing when drawings were opened.
- An upshot has been resolved where Cyrillic characters were not accustomed when entering path data for the AutoCAD Support File Search Path.
- An consequence has been resolved when attempting to connect to WMS using the AutoCAD Map 3D Connect command.
- An issue has been resolved where users may not take been able to consign a drawing to DGN using the Export Ceremonious 3D Cartoon command when MicroStation® was installed.
- An upshot has been resolved where annotation labels could not be copied from i drawing to another.
- An issue has been resolved where descriptions defined for Toolbox items were being displayed as tooltips for Toolbox items.
- An issue has been resolved where referenced drawings that contained hatches were plotting differently than the source drawings.
Pipe Networks and Pressure Networks
- An consequence has been resolved where the Break Pipage command for pressure pipes may not take worked equally expected.
- An issue has been resolved where connecting a pipe to an existing round construction may have reset the structure size to the smallest size in its family.
- An issue has been resolved where structures with 0′ (0m) sump depth may have been fatigued incorrectly in contour view.
- An issue has been resolved where an Optional Property for a pipe or construction was non retained.
- An result has been resolved with the performance of opening drawings in certain cases where the drawings included information-referenced pipe networks.
- An issue has been resolved where using the Select command from the Pipes or Structures collections in the Prospector tree did not select the pipes and structures in the drawing.
- An issue has been resolved where materials could not exist selected from the drop-down list when using specific parts lists.
- An upshot has been resolved where only ii materials could exist added into the drop-downward listing when calculation parts to a part listing in a metric drawing.
Points, Surfaces, and Survey
- An issue has been resolved where user-defined backdrop were removed from all COGO points afterwards deleting and so undoing the deletion of a single COGO signal.
- An consequence has been resolved where the Build option Maximum Bending Between Adjacent TIN Lines on the Definition tab of the Surface Properties dialog box was not saved when a drawing was reopened.
- An result has been resolved in cases where in that location was a large athwart error in survey traverse analysis.
- Alert icons are now displayed for survey figures in the following situations:
- If a figure contains only two consecutive curve vertices.
- If there is an issue with the geometric information for a effigy that is imported from an FBK file.
The warning icons are displayed on the Figures drove on the Survey tab in Toolspace and for private figures in the Toolspace detail view and in the Figures Editor.
Vault
- An issue has been resolved where an unexpected fault would occur when checking in a cartoon using Autodesk® Vault 2022 R2 Server.
- An result has been resolved where revisions of xrefs were non managed correctly when using Autodesk Vault.
- An event has been resolved with Autodesk Vault performance when opening a canvas fix within AutoCAD Civil 3D in cases where multiple projects are displayed in the Prospector tree.
H2o Analysis
- An consequence has been resolved where the graphic plot for an inlet section in Hydraflow Storm Sewers listed the units for inlet depth incorrectly.
- An issue has been resolved where junction loss was non properly computed in Hydraflow Tempest Sewers.
Due a contempo Microsoft modify, the Bing module has stopped working.
Information technology has now exist rewritten and a hotfix is available for the 2022 and 2022 AutoCAD based products
AutoCAD 2022 based production
Autodesk® Autocad® 2022 Geolocation Online Map Hotfix
AutoCAD 2022 based products
Autodesk® Autocad® 2022 Geolocation Online Map Hotfix
Autodesk has released AutoCAD Civil 3D SP1.
The README file states:
The following issues have been resolved in Autodesk AutoCAD Ceremonious 3D 2022 Service Pack 1:
Corridor Modeling and Analysis
- A data-specific result has been resolved where attempting to rebuild a corridor would cause the awarding to close unexpectedly.
- An issue has been resolved where cloth have off would compute only half of the areas of the materials when more i baseline existed.
- An issue has been resolved where the corridor characteristic line areas were not using the lawmaking set styles assigned to the corridor.
- An consequence has been resolved where the meridian target in the DaylightBasin and DaylightBasin 2 subassemblies was incorrectly solving for the basin elevation.
- An issue has been resolved where the German Country Kit assembly GermanSA_Fahrbahn_ausserorts was missing the feature line on the correct side in a cut terrain situation.
Pipe Networks and Pressure Networks
- An issue has been resolved where information-referenced gravity pipe network styles were reset when the source model was updated and the network was synchronized.
- An event has been resolved where information-referenced pressure network styles were reset when the source model was updated and the network was synchronized.
- An issue has been resolved where pressure networks were not created properly when using the Create Pressure level Network from Industry Model control.
- An issue has been resolved where an invalid office and/or pipage style inside a pipe network would cause the awarding to close unexpectedly.
Alignments and Profiles
- An issue has been resolved where editing an alignment when another contour had been superimposed onto its profile would cause the application to shut unexpectedly.
- An upshot has been resolved regarding the adjustment of the profile station range when creating a profile after creating and deleting an unrelated alignment.
Survey
- A utility which provides the ability to salve an AutoCAD Ceremonious 3D 2022 survey database for utilize in AutoCAD Civil 3D 2022 is included in this service pack. This utility can be accessed from the AutoCAD Civil 3D Toolbox after installing this service pack.
- An event has been resolved where attempting to delete a survey figure from the Figures Editor would cause the application to shut unexpectedly.
Grading and Surfaces
- An effect has been resolved where deleting all grading projections and repeatedly running the UNDO command would crusade the application to close unexpectedly.
- An event has been resolved where deleting points from a surface when the DACH Extension is installed would cause the application to shut unexpectedly.
- An issue has been resolved where draped images that were rendered when hardware acceleration was turned on would exist mirrored.
Miscellaneous
- An outcome has been resolved where a description was non included from a data-referenced source object.
- An issue has been resolved where unexpected characters and text was added to objects in a drawing and inside any drawings that were opened during the AutoCAD Civil 3D session.
- An issue has been resolved where starting AutoCAD Civil 3D in goose egg certificate state startup mode would cause the awarding to close unexpectedly.
- An issue has been resolved where the right CODES file was not being read from the registry.
- An result has been resolved where modifying an object on a locked layer would cause the application to close unexpectedly.
- An issue has been resolved where a curve label would show its content reversed when located at 0 and 180 degrees in a drawing.
- An issue has been resolved where the Print button in the Hydraflow Express Rainfall IDF Curve dialog box would not work properly.
Download here.
Autodesk has released it's Civil 3D 2022 Service Pack 2.
The following issues have been resolved in Autodesk AutoCAD Civil 3D 2022 Service Pack 2:
Corridor Modeling and Analysis
- An result has been resolved where corridor materials were not being calculated for both sides of a roadway and in cases where there were corridors with multiple, non-parallel baselines.
- An event has been resolved with the SampleLineGroup.Create() API method.
- An issue has been resolved where corridor solids were not exported to original coordinates.
- An effect has been resolved where corridor solids were non exported properly for corridor links.
- An issue has been resolved where corridor solids were not exported properly for specific areas of intersections.
Pipe Networks and Pressure Networks
- An effect has been resolved where alignments were non created properly from a pressure network that had branches.
- An issue has been resolved where parts from a custom part list were resizing to the smallest office in the office family when subsequent parts were added.
- An outcome has been resolved where data-referenced gravity pipage network styles were reset when the source model was updated and the network was synchronized
- An effect has been resolved where pressure level networks were not created properly when using the Create Pressure Network from Industry Model command.
- An upshot has been resolved where the meridian of the beginning structure in a gravity pipe network was not set up properly when using a 3D polyline as the selected object.
- An upshot has been resolved where gravity pipe and structure collections could not be selected in the Prospector tree.
Alignments and Profiles
- A data-specific issue has been resolved where profiles were shifting when an AutoCAD Ceremonious 3D 2012 drawing that contains profiles was opened in AutoCAD Civil 3D 2014, which resulted in a alter in stationing.
- An issue has been resolved where the cursor appeared to be offset from its actual location when laying out and editing a profile.
- An outcome has been resolved where the geometry curve lengths for rail alignments could not be edited in the tabular editor.
Miscellaneous
- An issue has been resolved where turning off the navigation bar and ViewCube would result in lineweights non being applied properly during plotting for certain AutoCAD Civil 3D objects.
- An issue has been resolved where unexpected characters and text was added to objects in a drawing and within whatsoever drawings that were opened during the AutoCAD Civil 3D session.
- A operation consequence when logging into Autodesk® Vault from AutoCAD Civil 3D 2022 has been resolved.
- An upshot has been resolved where the Transformation Grid Scale Factor was non applied properly for ground coordinates when using the Geodetic Computer.
- An issue has been resolved where the Print button in the Hydraflow Limited Rainfall IDF Curve dialog box would not work properly.
- An event has been resolved where pay item formulas were non properly incorporated into take off.
- An issue has been resolved where special characters in an AutoCAD Civil 3D object name would cause an consequence when an IMX file that contained these characters was imported into Autodesk ® Infraworks™.
- An event has been resolved where the north arrow was not being rotated properly when using the Plan Production tools.
Download here.
Almas Suljevic from Autodesk has posted a keen prepare to the Backdrop dialog box displaying "No Selection" even when you have objects selected.
You can read more hither.
Autodesk has released a service pack for Civil 3D 2014. The issues resolved are as follows:
Alignments
- Using the Create Best Fit Alignment command no longer causes the application to close unexpectedly.
Corridor Design
- Importing a subassembly that exists in a binder with a long path no longer causes the awarding to close unexpectedly.
- Setting an override from True to False for a parameter in the Corridor Section Parameter Editor when the Corridor Section Editor viewports are configured to display multiple viewports no longer causes the awarding to close unexpectedly.
- Surface profiles that are generated from a data-referenced corridor surface and a data-referenced alignment (using the data shortcuts feature) are now dynamic.
- The application no longer closes unexpectedly when you lot are working in a drawing with the Corridor Department Editor open up and you and so open (or create) and and so close another cartoon.
- Importing a subassembly when a Tool Palette is not displayed no longer causes the application to close unexpectedly. To import a subassembly to a Tool Palette, the Tool Palette must first be open. If no Tool Palette is open, the selection to import the subassembly to a Tool Palette is not available for option.
- Attaching another subassembly to a LinktoMarkpoint subassembly that exists in an kickoff associates no longer causes the application to close unexpectedly.
- 3D polylines that exist in the drawing no longer appear by default in the Corridor Department Editor.
- Importing a subassembly to a Tool Palette and then re-importing the same subassembly no longer causes the application to shut unexpectedly.
- When you lot create a subassembly from a polyline, the beliefs of the Link Creation setting now works as expected.
- Corridor feature lines that are fatigued at stock-still offset distances at present appear every bit expected in the drawing.
Section Views
- The positions of volume tables are at present maintained when a drawing containing them is saved, airtight, and reopened.
General/Other
- Stability when using a carte du jour with a drop down list has been improved.
- Using Ctrl+Tab to switch between open drawings while the Layer Manager is open no longer causes the application to brandish an error message and shut unexpectedly.
- Opening a drawing that was created in AutoCAD Ceremonious 3D 2013 (or in an earlier version) that contains data references no longer causes the application to shut unexpectedly.
- Selecting points within the Betoken Editor and then clicking in the Style column no longer causes the application to shut unexpectedly.
- Importing profile view band styles now works every bit expected.
- Creating feature lines from a large number of polylines no longer causes the application to shut unexpectedly.
- Grip editing a feature line after using the feature line Fillet control and so using the UNDO command no longer causes the application to shut unexpectedly.
- Using the ExportToAutoCAD command on a cartoon that has an attached xref no longer causes the awarding to close unexpectedly.
- Using the APPLOAD command to load AeccCustomDraw.dbx, AeccCustomEvent.dbx and AeccCustomUI.dbx now works as expected.
- The geographic location is now right when the units in the drawing are different from the units in the Geographic Location dialog box.
- To use the ImportCAiCEKCM command, the Microsoft® Access Database Engine 2010 Redistributable must be installed first. You can download the Microsoft Access Database Engine 2010 Redistributable from http://world wide web.microsoft.com/en-united states/download/details.aspx?id=13255.
- Starting the application after uninstalling AutoCAD® Map 3D 2010 no longer causes the application to close unexpectedly.
Labels
- Values are at present rounded correctly in profile station labels that utilize station index format with rounding.
Autodesk AutoCAD Map 3D Integration
- Alive Map Data tiles are now loaded correctly when opening the application.
- The MAPIMPORT command at present imports SHP and SDF files as expected.
Object Enabler
- Using the eTransmit command in Autodesk® AutoCAD® or Autodesk® AutoCAD LT® when the Civil Object Enabler is installed no longer causes the program to close unexpectedly.
- Drawings that comprise alignments, profiles, and pressure networks that are created in the electric current version of the plan so saved in an before version of the program now open every bit expected in AutoCAD (or other object-enabled program) when the Civil Object Enabler is installed.
Parcels
- Running the Parcel Map Check report no longer causes the application to close unexpectedly.
- Using the Delete PI command on a parcel segment point of intersection no longer causes the application to close unexpectedly.
- Editing a parcel segment by property the Ctrl key downward and moving a grip no longer causes the application to close unexpectedly.
Pipes
- Deleting a pipe or structure when the Toolspace window is hidden no longer causes the application to close unexpectedly.
- On the Microsoft ® Windows 8 ® operating system, if y'all display a rollover tooltip for a pipage network and then get out the application, the application no longer closes unexpectedly.
- Changing a pipage network part in the source file of a data shortcut now updates the part style in the referenced pipe network as expected.
- Inserting a custom function into a pipage network now works equally expected.
- Using the Batch Import command to import pipage network parts into the Content Catalog Editor now works as expected.
- The accuracy of the Role Architect Data Structure Table has been improved.
- The structure style cake rotation is now aligned with the 3D solid.
Pressure Networks
- When using the Follow Surface command, the application no longer closes unexpectedly if the reference surface for the pressure network has a gap in information technology.
Profiles
- Using the Profile Layout Tools toolbar no longer causes the application to close unexpectedly.
Contour Views
- Pressure network parts can at present exist re-drawn in profile view after drawing them in profile view and deleting them.
Points
- Adding points to a tabular array, using the Undo control, and so selecting the table no longer causes the application to become unresponsive.
- The Convert Land Desktop Points command now uses the Preserve Original Bespeak Layer setting.
Signal Clouds
- The Window selection option in the Add Points to Surface command now works every bit expected.
- Creating a point cloud or a surface from an ESRI ASC file now works as expected.
- Attaching an RCP or RCS indicate deject to the drawing then adding AutoCAD Civil 3D properties to the point deject now works as expected.
Project Manager
- Extra .map files are no longer created when importing a Vault project.
Quantity Takeoff
- Adding, removing, and then re-calculation a indicate file to a surface definition no longer causes the application to close unexpectedly.
Subassembly Composer
- Void areas in corridor subassemblies are now displayed every bit expected in cross section views.
Surfaces
- Surface analysis colors defined from colour books are no longer converted to index colors for rendering in model infinite.
- Surface analysis data is now maintained afterward the surface is rebuilt.
- Surface analysis values that are outside of the divers ranges no longer appear every bit white in the drawing.
- Switching to a different layout when the Level of Detail style is active no longer causes the application to shut unexpectedly.
- If a DEM file that is added as surface data does non contain coordinate system information, the coordinate system that y'all assign when calculation the DEM file is now used for the surface.
- DEM files inserted equally raster images are now positioned correctly.
- Polylines created with the Water Drop command at present use the PLINEGEN system variable.
- Using the Paste Surface command no longer causes the awarding to close unexpectedly.
Survey
- Exploding a large number of survey figures, and so copying and pasting the entities into another drawing, no longer causes the application to close unexpectedly.
- The Logging Enabled setting (under Modify Reporting) is now included when the survey database settings are saved to an external file.
- Importing a LandXML file with an invalid data format no longer causes the awarding to close unexpectedly.
- Creating a new survey database after importing survey database settings from a file no longer causes the application to close unexpectedly.
- Traverses are now inserted into the drawing with the expected rotation angle.
- Importing a field book file when the drawing coordinate organisation and survey database coordinate system are different no longer causes the awarding to close unexpectedly.
- Importing a field volume without having a network selected first will no longer cause the application to close unexpectedly.
- Coordinate values are now created correctly when importing a Face up ane and Face up ii reciprocal observation field book file.
Download the service pack hither.
Beneath are the resolutions addressed in the SP4
COGO
- The Coordinate Geometry Editor now accepts Degrees/Minutes/Seconds in a spaced format.
Corridor Design
-
An event that caused feature lines to non display equally expected has been resolved.
-
An issue that caused errant feature lines to be generated between stations has been resolved.
Cross Sections
- Volume tables now remain every bit saved when reopening the cartoon.
- Non-orthogonal sample lines now sample corridor links as expected.
Data Shortcuts
- Profiles are no longer duplicated in multiple alignments.
-
An result that caused pipes and pipage labels to not plot as expected has been resolved.
-
Creating a reference to a grid surface no longer causes the application to shut unexpectedly.
Full general
-
The performance of tooltips has been improved.
Labels
- Alignment labels using the crows foot cake are now aligned every bit expected.
LandXML
- When importing LandXML data, alignments are at present imported to the specified drawing layer.
Pipage Networks
- The structure style block rotation is now aligned with the 3D solid.
-
The Part Matchup Settings for Box to Box and Elliptical to Elliptical are no longer being ignored.
Project Managment
- DwgRelPath retains leading periods on Windows XP based workstations.
- An error is no longer generated when checking in a drawing with a reference, when the reference cartoon is checked out by another user.
Reports
- Station Equations now piece of work as expected when the decreasing option is used.
Surface
- Waterdrop polylines now display proper linetype generation.
- New surfaces created from a DEM now utilise the user specified coordinate organisation.
Superelevation
- The diagram in the Create Superelevation View dialog box is now displayed equally expected when the alignment is referenced.
Survey
- The stability of traverse analysis has been improved.
- The latitudes and departures for the face ii observations are now calculated equally expected.
- The accuracy of the traverse analysis written report has been improved.
- An consequence that acquired incorrect survey backsight calculations has been resolved.
- An issue that prevented the utilise of the Crandall rule when adjusting with a mapcheck or a bearing traverse has been resolved.
- Accuracy when using a reciprocal ascertainment field book file has been improved.
Yous can download the service pack here.
Autodesk has re-released the DGN cleanup utility hotfix.
Get it while it'southward hot here.
Source: https://civil3dj.wordpress.com/category/civil-3d-fixes/page/4/
0 Response to "fatal error drawing on profile views civil 3d"
Post a Comment